Serging

  • Table Polish Paste

    Table Polish Paste

    Use table polish with cloth to create a clean and ultra-smooth surface for your quilt to glide over.

  • MO Attachment Set 6pcs

    MO Attachment Set 6pcs

    This is a set of six presser feet that can be used for practical sewing or decorative stitching.

    This set contains the following: blind stitch presser foot (for right needle), elasticator presser foot, cording presser foot, beading presser foot, piping presser foot, and gathering presser foot.

    Model & Part Number:

    • MO-1200QVP: 40064938
    • MO-2000QVP: 40149061
  • MO Attachment Set 8pcs

    MO Attachment Set 8pcs

    This is a set of eight presser feet that can be used for practical sewing or decorative stitching.

    This set contains the following: blind stitch presser foot (for right needle), universal blind stitch presser foot (for right and left needle), elasticator presser foot, cording presser foot, beading presser foot, curved beading presser foot, piping presser foot and gathering presser foot.

    Model & Part Number:

    • MO-1200QVP: 40123395
    • MO-2000QVP: 40149062
  • Upper Looper Converter

    Upper Looper Converter

    Two-thread overlocking or flatlock can be sewn with a 3 or 4-thread overlock sewing machine.

    By covering the upper looper, you can sew with only two threads (lower looper thread and needle thread). Although two pieces of fabric cannot be sewn together, you can easily sew overlocking with two threads.

    Model & Part Number:

    • MO-1200QVP: A9825-634-0A0
  • Waste Collector

    Waste Collector

    This box collects scraps of fabric cut by the overlock sewing machine.

    This is useful for throwing out all scraps after work is complete, without allowing them to scatter around the work area. You may also store machine accessories in this box.

    Model & Part Number:

    • MO-1200QVP: A910-880-L000
    • MO-2000QVP: 40134096
  • Coverstitch Hem Guide

    Coverstitch Hem Guide

    This guide is used for setting the folded width of the fabric and the stitching position for coverstitching.

    This guide can set the folded width of the fabric and align the edge of the fabric from the back side, where it is difficult to see the coverstitching. First fold the fabric to the width that is to be sewn and then adjust the guide according to the width of the fold. This guide is perfect for finishing pants and sleeve hems of clothes.

    Model & Part Number:

    • MCS-1700QVP: 40177371
  • Chain Stitch Presser Foot

    Chain Stitch Presser Foot

    This presser foot is designed specifically for sewing chain stitches.

    Use the left needle with this presser foot. (Be sure to remove the right and center needles before using this presser foot.)

    Model & Part Number:

    • MCS-1700QVP: 40177370
  • Gathering Presser Foot

    Gathering Presser Foot

    This presser foot is used for sewing together two pieces of fabric while creating gathers.

    Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 or 2.0. Gathers can also be created in a single piece of fabric.

    Model & Part Number:

    • MO-1200QVP: A9860-655-0A0C
    • MO-2000QVP: 40138121
  • Piping Presser Foot

    Piping Presser Foot

    This presser foot is used for sewing on piping while overlocking the edge of the fabric.

    Sew along the edge of the piping with the tubular part of the tape fed into the grove along the bottom of this presser foot. Use either needles or only the left needle with this presser foot.

    Model & Part Number:

    • MO-1200QVP: A9865-655-0A0A
    • MO-2000QVP: 40138103
  • Curved Beading Presser Foot

    Curved Beading Presser Foot

    This presser foot is used for sewing on strands of pearls, beads, or sequins along curved.

    Braiding of a width of up to 4mm can be sewn onto an outside curve (toward the left) with a diameter of at least 15cm. This presser foot being short at the front allows it to easily follow curved.

    Model & Part Number:

    • MO-1200QVP: A9511-634-0A0A
    • MO-2000QVP: 40149059
  • Beading Presser Foot

    Beading Presser Foot

    This presser foot is used for sewing on strands of pearls, beads, or sequins.

    Braiding to a width of up to 4mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of the fabric by sewing along a folded edge with a flatlock.

    Model & Part Number:

    • MO-1200QVP: A9870-634-0A0A
    • MO-2000QVP: 40138106
  • Cording Presser Foot

    Cording Presser Foot

    This presser foot is used for sewing on nylon thread or wire for crafts.

    Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills to prevent them from collapsing.

    Model & Part Number:

    • MO-1200QVP: A9820-655-0A0A
    • MO-2000QVP: 40138099

Items 1 to 12 of 17 total

  1. 1
  2. 2