Accessories

  • Quilt Clips

    Quilt Clips

    4 quilt clips for 1 ½” frame rails.

    These quilt clips allow you to adjust your quilt and have the perfect fabric tension while quilting.

    Model & Part Number:

    • TL-2200QVP: TL-2200CLIP
  • Rear Handles

    Rear Handles

    Handle allows you to operate the sewing machine from back of machine by moving the LCD screen and laser light.

    Model & Part Number:

    • TL-2200QVP: Rear Handlebars
  • Table Polish Paste

    Table Polish Paste

    Use table polish with cloth to create a clean and ultra-smooth surface for your quilt to glide over.

  • Standard Presser Foot

    Standard Presser Foot

    This presser foot is used for regular overlock stitching. It can also be used for swing in tape while overlocking the edge of the fabric.

    The shape, functionality and guideline positions differ depending on the model. For details, refer to the manual supplied with your machine.

    Model & Part Number:

    • MO-1200QVP: A1501-800-0A0
    • MO-2000QVP: 40134861
    • MCS-1700QVP: 40122001
  • Blind Stitch Presser Foot (For Right Needle)

    Blind Stitch Presser Foot (For Right Needle)

    This presser foot is used to sew bling hem stitching while overlocking the edge of the fabric.

    With this presser foot, the fabric edge folded in three can be inserted and the guide plate positioned so that stitching will not be visible from the right side of the fabric. Since this presser foot is designed specifically for use with the right needle, it cannot be used with the left needle of a two-needle sewing machine.

    Model & Part Number:

    • MO-1200QVP: A9810-634-0A0A
    • MO-2000QVP: 40138091
  • Universal Blind Stitch Presser Foot (For Right & Left Needle)

    Universal Blind Stitch Presser Foot (For Right & Left Needle)

    This presser foot is used to sew blind hem stitching, decorative flatlock, or pintucks.

    This presser foot can be used with either the right or the left needle and has a guide plate that can be moved within a wide range. Since the seam width can be adjusted, this presser foot is also useful for decorating by sewing along a folded edge with decorative flatlock or rolled hem (pintuck) stitches.

    Model & Part Number:

    • MO-1200QVP: A9521-634-0A0A
    • MO-2000QVP: 40149058
  • Elasticator Presser Foot

    Elasticator Presser Foot

    This presser foot is used for sewing in elastic tape while overlocking the edge of the fabric.

    Tension is applied to the elastic tape by the roller guide at the front of the presser foot, stretching the tape while it is sewn in. The tension can be adjusted with the roller clamping screw. Elastic tape with a width of 5 to 8mm width is best.

    Model & Part Number:

    • MO-1200QVP: A9815-655-0A0A
    • MO-2000QVP: 40138095
  • Cording Presser Foot

    Cording Presser Foot

    This presser foot is used for sewing on nylon thread or wire for crafts.

    Hook the nylon thread or wire on the two gimp guides before sewing. This will give tension to fabric edges, such as on frills to prevent them from collapsing.

    Model & Part Number:

    • MO-1200QVP: A9820-655-0A0A
    • MO-2000QVP: 40138099
  • Beading Presser Foot

    Beading Presser Foot

    This presser foot is used for sewing on strands of pearls, beads, or sequins.

    Braiding to a width of up to 4mm as well as transparent or decorative threads can be sewn on. The strand can also be sewn in the middle of the fabric by sewing along a folded edge with a flatlock.

    Model & Part Number:

    • MO-1200QVP: A9870-634-0A0A
    • MO-2000QVP: 40138106
  • Curved Beading Presser Foot

    Curved Beading Presser Foot

    This presser foot is used for sewing on strands of pearls, beads, or sequins along curved.

    Braiding of a width of up to 4mm can be sewn onto an outside curve (toward the left) with a diameter of at least 15cm. This presser foot being short at the front allows it to easily follow curved.

    Model & Part Number:

    • MO-1200QVP: A9511-634-0A0A
    • MO-2000QVP: 40149059
  • Piping Presser Foot

    Piping Presser Foot

    This presser foot is used for sewing on piping while overlocking the edge of the fabric.

    Sew along the edge of the piping with the tubular part of the tape fed into the grove along the bottom of this presser foot. Use either needles or only the left needle with this presser foot.

    Model & Part Number:

    • MO-1200QVP: A9865-655-0A0A
    • MO-2000QVP: 40138103
  • Gathering Presser Foot

    Gathering Presser Foot

    This presser foot is used for sewing together two pieces of fabric while creating gathers.

    Using the differential feed, gathers can be created in only the lower piece. You can adjust the amount of fabric that is gathered by changing the differential feed between 1.5 or 2.0. Gathers can also be created in a single piece of fabric.

    Model & Part Number:

    • MO-1200QVP: A9860-655-0A0C
    • MO-2000QVP: 40138121

Items 13 to 24 of 106 total